Skip to content

FM548 GF/FM548 LL

At a glance data:

Engine Model:
Cat C7.1
Net Power - ISO 9249:
271hp
Engine Power - ISO 14396:
275hp
Net Power - ISO 9249 (DIN):
275hp (metric)
With 30% more swing torque than the previous series machine, the Cat FM548 can move timber quickly and efficiently.

Overview

The Cat® FM548 is simply the best choice in its size class for doing roadbuilding, processing, and log-loading work. With 275 HP and significant hydraulic flow and swing torque increases, the superior performance and exceptional operator comfort and safety of the FM548 will help you produce day in and day out.

Category:
Forest Machines

Brand:
Caterpillar

Engine

Engine Model:
Cat C7.1
Net Power - ISO 9249:
271hp
Engine Power - ISO 14396:
275hp
Net Power - ISO 9249 (DIN):
275hp (metric)
Engine Power - ISO 14396 (DIN):
279hp (metric)
Bore:
4.13in
Stroke:
5.31in
Displacement:
433.3in³
Biodiesel Capability:
B20¹
Emissions:
Meets U.S. EPA Tier 4 Final, EU Stage V emission standards.
Note (1):
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at time of manufacture.
Note (2):
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or Caterpillar Machine Fluids Recommendations (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Drive

Maximum Travel Speed:
3mile/h
Maximum Drawbar Pull:
66,319lbf

Hydraulic System

Main System - Maximum Flow:
132.6gal/min
Maximum Pressure - Equipment:
5076psi
Maximum Pressure - Equipment - Lift Mode:
5511psi
Maximum Pressure - Travel:
5076psi
Maximum Pressure - Swing:
4061psi

Swing Mechanism

Swing Speed:
8.1r/min
Maximum Swing Torque:
100308lbf·ft

Weights

General Forestry:
83300lb
Note (1):
22" SEC Riser, High Wide undercarriage, Reach Boom, R2.95 m (9'8") Reach stick, 700mm (28") double grouser shoes, No bucket.
Log Loader (U/U):
89,290lb
Note (2):
48" REC Riser, High Wide undercarriage, Log Loader boom, 3.76 m (12'4") Under/Under stick with live heel, 700mm (28") double grouser shoes, no grapple.

Service Refill Capacities

Fuel Tank:
262gal (US)
Cooling System:
10gal (US)
Engine Oil:
7gal (US)
Swing Drive:
4gal (US)
Final Drive - Each:
3gal (US)
Hydraulic System - Including Tank:
92gal (US)
Hydraulic Tank:
49gal (US)
DEF Tank:
11gal (US)

Dimensions

Note (1):
General Forestry
Shipping Height - Tilted Cab:
11.5ft
Handrail Height:
11.5ft
Length: General Forestry - Boom Stretched Out:
41.3ft
Length: Log Loader - Boom Stretched Out:
49.6ft
Tail Swing Radius:
11.6ft
Counterweight Clearance:
4.9ft
Ground Clearance:
2.5ft
Track Length:
16.6ft
Track Length to Center of Rollers:
13.2ft
Track Gauge:
9.2ft
Transport Width:
11.6ft

Working Ranges

Max Reach at Stick Nose at Ground Level - General Forestry Road Builder:
29.5ft
Max Reach at Grapple Mount on Heel at Ground Level - Log Loader Under/Under:
34.4ft

Air Conditioning System

Note (1):
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.1 (22" Riser CAB)/2.2 (48"/72" Riser CAB) kg of refrigerant, which has a CO2 equivalent of 3.003/3.146 metric tonnes.

Standard Equipment

note

  • Standard and optional equipment may vary. Consult your Cat dealer for details.

cab

  • ROPS Forestry cab with polycarbonate windows
  • 4-point harness seat belt
  • Heated and cooled seat with air-adjustable suspension
  • Integrated joysticks
  • Tilt-up left-side console (side-entry cab only)
  • High-resolution touchscreen monitor
  • Bluetooth integrated radio (including USB, aux port and microphone)
  • 12V DC outlets
  • Keyless push-to-start engine control
  • Automatic bi-level air conditioner
  • LED dome and floor lights
  • Windshield wiper and washer
  • Behind seat storage
  • Retractable sunshade

cat technologies

  • VisionLink
  • Remote Flash
  • Remote Troubleshoot

electrical system

  • Maintenance-free 1000 CCA batteries (x4)
  • Centralized electrical disconnect switch
  • LED chassis and left-side boom light - 1,800 lumen
  • 115-amp alternator
  • 24-volt electric starting
  • Horn and travel alarm
  • Pre-start monitoring system
  • Tool control software
  • Secondary engine shutoff switch

engine

  • Electric fuel priming pump
  • Three selectable modes: Power, Smart, Eco
  • Automatic engine speed control
  • Automatic engine idle shutdown
  • Up to 4600 m (15,092 ft) altitude capability
  • 52° C (126° F) high-ambient cooling capacity
  • -32° C (-25° F) cold start capability
  • Hydraulic reverse fan
  • Two-stage fuel filter system
  • Double element air filter with integrated pre-cleaner

hydraulic system

  • Boom and stick regeneration circuits
  • Boom and stick drift reduction valve
  • Electronic main control valve
  • Automatic hydraulic oil warmup
  • Automatic swing parking brake
  • High performance hydraulic return filter
  • Automatic two speed travel
  • Bio hydraulic oil capability
  • High torque swing drive
  • Swing cushion valve
  • Tool control software

safety and security

  • Caterpillar One Key security system
  • Lockable service doors
  • Lockable external tool/storage box
  • Lockable disconnect switch
  • Lockable fuel cap and hydraulic tank
  • Service platforms with anti-skid plate and countersunk bolts
  • Right-hand rail and hand hold
  • Signaling/warning horn
  • Ground-level secondary engine shutoff switch
  • Rearview camera
  • Operator Protective Guards

service and maintenance

  • Side-entry to service platforms
  • Grouped location for engine oil and fuel filters
  • Scheduled Oil Sampling (S·O·S) ports
  • Integrated vehicle health management system

undercarriage and structures

  • High Wide undercarriage
  • 8.5" pitch Cat grease lubricated track chain with pressed fit pin
  • Catwalks
  • Tie down points
  • Counterweight fuel tank
  • Heavy-duty track rollers and frames
  • Heavy-duty travel motor guards
  • Heavy-duty bottom guards
  • Track guiding guards
  • High drawbar final drives
  • Heavy-duty recoil springs
  • Heavy-duty hydraulic swivel
  • Heavy-duty hydraulic swivel guard

Optional Equipment

note

  • Standard and optional equipment may vary. Consult your Cat dealer for details.

booms and sticks

  • 5.9 m (19'4") Reach boom - General Forestry
  • 6.55 m (21'6") boom - Log Loader
  • 2.95 m (9'8") Reach stick
  • 3.71 m (12'2") Goose Neck stick
  • 3.76 m (12'4") Under/Under stick
  • 4.05 m (13'3") Over/Under stick
  • 4.05 m (13'3") Power Clam stick
  • CB2 family bucket linkage

cab

  • Side entry with 559 mm (22") tilting riser
  • Rear entry with 1219 mm (48") tilting riser
  • Rear entry with 1829 mm (72") tilting riser

cat technologies

  • VisionLink Productivity (VisionLink subscription required)

electrical system

  • Premium General Forestry lighting package
  • Premium Log Loader lighting package

engine

  • Cold start package with block heaters

hydraulic system

  • Medium pressure circuit

safety and security

  • Right-hand-sideview cameras
  • Inspection lighting

undercarriage and structures

  • 900 mm (35") Tri Link shoes
  • 850 mm (33") triple grouser shoes
  • 700 mm (28") double or single grouser shoes
H130 GC S Hammer

H130 GC S Hammer

Engine Model:
Cat C7.1
Net Power - ISO 9249:
271hp
Engine Power - ISO 14396:
275hp
Net Power - ISO 9249 (DIN):
275hp (metric)