Skip to content

FM568 GF/FM568 LL

At a glance data:

Engine Model:
Cat C9.3B
Net Power - ISO 9249:
346hp
Engine Power - ISO 14396:
347hp
Net Power - ISO 9249 (DIN):
351hp (metric)
With increased engine power, swing power, and travel power, the Cat FM568 can move big timber quickly and efficiently.

Overview

The Cat® FM568 is the ultimate forestry & shovel logging weapon. With incredible swing torque, track power, lift, and stability, you can reliably produce more loads daily and increase production and profit while counting on outstanding service and support for your business.

Category:
Forest Machines

Brand:
Caterpillar

Engine

Engine Model:
Cat C9.3B
Net Power - ISO 9249:
346hp
Engine Power - ISO 14396:
347hp
Net Power - ISO 9249 (DIN):
351hp (metric)
Engine Power - ISO 14396 (DIN):
352hp (metric)
Bore:
4.53in
Stroke:
5.87in
Biodiesel Capability:
Up to B20¹
Displacement:
567.5in³
Emissions:
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (1):
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,900 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2):
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Drive

Maximum Travel Speed:
2.7mile/h
Maximum Drawbar Pull:
84,978lbf

Hydraulic System

Main System - Maximum Flow:
153.4gal/min
Maximum Pressure - Equipment:
5076psi
Maximum Pressure - Equipment - Lift Mode:
5511psi
Maximum Pressure - Travel:
5076psi
Maximum Pressure - Swing:
4119psi

Swing Mechanism

Swing Speed:
6.1r/min
Maximum Swing Torque:
151938lbf·ft

Weights

General Forestry:
106920lb
Note (1):
22" SEC Riser, High Wide undercarriage, Reach Boom, R3.9 m (12'10") Reach stick, 700mm (28") double grouser shoes, 1.64 m³ (2.14 yd³) HD bucket.
Log Loader (U/U):
108690lb
Note (2):
48" REC Riser(Easy Lock), High Wide undercarriage, Log Loader boom, 4.73 m (15'6") Under/Under stick with live heel, 700mm (28") double grouser shoes, no grapple.

Service Refill Capacities

Fuel Tank:
262gal (US)
Cooling System:
5gal (US)
Engine Oil:
8gal (US)
Swing Drive:
3gal (US)
Final Drive - Each:
3gal (US)
Hydraulic System - Including Tank:
101gal (US)
Hydraulic Tank:
49gal (US)
DEF Tank:
21gal (US)

Working Ranges

Max Reach at Stick Nose at Ground Level - General Forestry Road Builder:
38.3ft
Max Reach at Grapple Mount on Heel at Ground Level - Log Loader Under/Under:
43.1ft

Dimensions

Note (1):
General Forestry configuration with high wide undercarriage, 559 mm (22") tilting riser, Reach boom, R3.9 m (12'10") Reach stick, 700 mm (28") double grouser shoes, and 1.64 m³ (2.14 yd³) HD bucket.
Shipping Height - Tilted Cab:
12ft
Handrail Height:
11.5ft
Length: General Forestry - Boom Stretched Out:
50.6ft
Length: Log Loader - Boom Stretched Out:
55.6ft
Tail Swing Radius:
12.4ft
Counterweight Clearance:
4.9ft
Ground Clearance:
2.5ft
Track Length:
18ft
Track Length to Center of Rollers:
14.6ft
Track Gauge:
9.6ft
Transport Width:
12ft

Air Conditioning System

Note (1):
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.1 (22"/48" Riser CAB)/2.2 (72" Riser CAB) kg of refrigerant, which as a CO2 equivalent of 3.003/3.146 metric tonnes.

Standard Equipment

note

  • Standard and optional equipment may vary. Consult your Cat dealer for details.

cab

  • ROPS Forestry cab with polycarbonate windows
  • 4-point harness seat belt
  • Heated and cooled seat with air-adjustable suspension
  • Integrated joysticks
  • Tilt-up left-side console (side-entry cab only)
  • High-resolution touchscreen monitor
  • Bluetooth integrated radio (including USB, aux port and microphone)
  • 12V DC outlets
  • Keyless push-to-start engine control
  • Automatic bi-level air conditioner
  • LED dome and floor lights
  • Windshield wiper and washer
  • Behind seat storage
  • Retractable sunshade

cat technologies

  • Remote Flash

electrical system

  • Maintenance-free 1000 CCA batteries (x4)
  • Centralized electrical disconnect switch
  • LED chassis, boom/stick, and cab lights
  • 115 Amp alternator
  • 24-volt electric starting
  • Horn and travel alarm
  • Pre-start monitoring system
  • Tool control software
  • Secondary engine shut off switch

engine

  • Electric fuel priming pump
  • Three selectable modes: Power, Smart, Eco
  • Automatic engine speed control
  • Automatic engine idle shutdown
  • Up to 4500m (14,764 ft) altitude capability
  • 52° C (126° F) high-ambient cooling capacity
  • -32° C (-25° F) cold start capability
  • Hydraulic reverse fan
  • Two-stage fuel filter system
  • Double element air filter with integrated pre-cleaner

hydraulic system

  • Boom and stick regeneration circuits
  • Boom and stick drift reduction valve
  • Electronic main control valve
  • Automatic hydraulic oil warmup
  • Automatic swing parking brake
  • High performance hydraulic return filter
  • Automatic two speed travel
  • Bio hydraulic oil capability
  • High torque swing drive
  • Swing cushion valve
  • Tool control software

safety and security

  • Caterpillar One Key security system
  • Lockable service doors
  • Lockable external tool/storage box
  • Lockable fuel caps and hydraulic tank
  • Service platforms with anti-skid plate and countersunk bolts
  • Right-hand handrail and handhold
  • Signaling/warning horn
  • Travel alarm
  • Ground-level secondary engine shutoff switch
  • Rearview camera

service and maintenance

  • Integrated vehicle health management system
  • Side-entry service platform
  • Left/Right-side fuel fill locations
  • Grouped location for engine oil and fuel filters
  • Scheduled Oil Sampling (S·O·S) ports

undercarriage and structures

  • High Wide undercarriage
  • Grease lubricated track with positive pin retention
  • Catwalks
  • Tie down points
  • Counterweight fuel tank
  • Heavy-duty track rollers
  • Heavy-duty travel motor guards
  • Heavy-duty bottom guards
  • Track guiding guards
  • High drawbar final drives
  • Heavy-duty recoil springs
  • Heavy-duty hydraulic swivel
  • Heavy-duty hydraulic swivel guard

Optional Equipment

note

  • Standard and optional equipment may vary. Consult your Cat dealer for details.

booms and sticks

  • 6.5 m (21'4") Reach boom - General Forestry
  • 7.09 m (23'3") boom - Log Loader
  • 3.2 m (10'6") Reach stick
  • 3.9 m (12'10") Reach stick
  • 4.73 m (15'6") Over/Under stick
  • 4.73 m (15'6") Power Clam stick
  • DB family bucket linkage

cab

  • Rear entry
  • Side entry
  • 559 mm (22") tilting riser
  • 1219 mm (48") tilting riser
  • 1829 mm (72") tilting riser
  • CB radio mounts
  • Cat Stick Steer
  • Auxiliary relay

electrical system

  • Premium lighting - General Forestry - 6 additional LED lights - 14 total
  • Premium lighting - Log Loader - 10 additional LED lights - 18 total

engine

  • Cold start package with block heater and ether assist

hydraulic system

  • Medium pressure circuit

safety and security

  • Easy lock cab tilting system (Rear entry cab only)
  • Cab riser light
  • Inspection lighting
  • Swing alarm
  • Right-hand-sideview camera

undercarriage and structures

  • 700 mm (28") double and single grouser shoes
  • 850 mm (33") triple grouser shoes
H180 GC S Hammer

H180 GC S Hammer

Engine Model:
Cat C9.3B
Net Power - ISO 9249:
346hp
Engine Power - ISO 14396:
347hp
Net Power - ISO 9249 (DIN):
351hp (metric)
H160 GC S Hammer

H160 GC S Hammer

Engine Model:
Cat C9.3B
Net Power - ISO 9249:
346hp
Engine Power - ISO 14396:
347hp
Net Power - ISO 9249 (DIN):
351hp (metric)
H160 S

H160 S Hammer

Engine Model:
Cat C9.3B
Net Power - ISO 9249:
346hp
Engine Power - ISO 14396:
347hp
Net Power - ISO 9249 (DIN):
351hp (metric)
H180 S

H180 S Hammer

Engine Model:
Cat C9.3B
Net Power - ISO 9249:
346hp
Engine Power - ISO 14396:
347hp
Net Power - ISO 9249 (DIN):
351hp (metric)