Skip to content

R1700 Underground Mining Loader

At a glance data:

Engine Model:
Cat® C13
Engine Power - Stage V Engine - ISO 14396:2002:
345hp
Engine Power - Tier 3 Engine - ISO 14396:2002:
361hp
Engine Power - VR Engine - ISO 14396:2002:
361hp

Overview

When it came time to redesign the Cat® R1700 Underground Loader, the goal was simple: add value, power and performance, and keep safety at the core. And we succeeded. With each cycle, the R1700 hauls 20% more material than its predecessor and is highly aggressive in the pile. It loads, climbs, hauls and dumps faster. And it’s factory ready for the latest technologies, including fully autonomous haulage, which takes safety and efficiency to a new level. The R1700 is infused with features to keep people safe. It offers three engine emission options, including one that meets Stage V standards, and can be tailored to your mine’s ventilation requirements. A clean-sheet redesign, the R1700 loader leverages engineering talent from across Caterpillar to create the next generation of productive underground loading.

Category:
Underground Mining Load Haul Dump (LHD) Loaders

Brand:
Caterpillar

Engine

Engine Model:
Cat® C13
Engine Power - Stage V Engine - ISO 14396:2002:
345hp
Engine Power - Tier 3 Engine - ISO 14396:2002:
361hp
Engine Power - VR Engine - ISO 14396:2002:
361hp
Note (1):
Power ratings apply at a rated speed of 1,800 rpm for LRCs (VR and Tier 3/Stage IIIA) engines when tested under the reference conditions for the specified standard.
Note (2):
Power ratings apply at a rated speed of 2,050 rpm for HRC (Stage V) engine when tested under the reference conditions for the specified standard.
Note (3):
All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (59° F) and fuel inlet temperature 40° C (104° F).
Note (4):
No engine derating required up to 2895 m (9,500 ft) altitude for Stage V engines, 3505 m (11,500 ft) altitude for Tier 3/Stage IIIA engines, and 3200 m (10,500 ft) for Tier 2/Stage II VR engines.
Note (5):
Optional Ventilation Reduction package available.
Note (6):
Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available.
Note (7):
Optional engine meeting the U.S. EPA Tier 4 Final and EU Stage V emission standards is also available.

Operating Specifications

Nominal Payload Capacity:
33069lb
Gross Machine Mass - Loaded:
138316lb
Static Tipping Load - Straight Ahead - Lift Arms Horizontal:
83218lb
Static Tipping Load - Full Turn - Lift Arms Horizontal:
69635lb
Breakout Force - Lift and Tilt:
53330lb

Weights

Operating Mass*:
95189lb
Operating Mass* - Front Axle:
38358lb
Operating Mass* - Rear Axle:
56831lb
Operating Mass + Rated Payload*:
128258lb
Operating Mass + Rated Payload* - Front Axle:
91412lb
Operating Mass + Rated Payload* - Rear Axle:
36846lb

Transmission

Forward - 1:
3mile/h
Forward - 2:
5.7mile/h
Forward - 3:
10.2mile/h
Forward - 4:
17.9mile/h
Reverse - 1:
3.7mile/h
Reverse - 2:
6.5mile/h
Reverse - 3:
11.6mile/h
Reverse - 4:
20.2mile/h

Hydraulic Cycle Times

Raise:
6.8s
Dump:
3.3s
Lower, Empty, Float Down:
2.9s
Total Cycle Time:
13.2s

Bucket Capacities

Bucket Capacities:
5.7-8.6 m³ (7.5-11.2 yd³)
Dump Bucket - 1 - Standard Bucket:
7.5yd³
Dump Bucket - 2:
8yd³
Dump Bucket - 3:
8.6yd³
Dump Bucket - 4:
9.4yd³
Dump Bucket - 5:
9.8yd³
Dump Bucket - 6:
10.5yd³
Light Material Bucket:
11.2yd³
Ejector Bucket:
7.6yd³
Bolt Together Bucket (1):
8.9yd³
Bolt Together Bucket (2):
9.8yd³

Turning Dimensions

Outside Clearance Radius:
272in
Inner Clearance Radius:
123.5in
Axle Oscillation:
Articulation Angle:
44°

Tires

Tire Size:
26.5R25

Service Refill Capacities

Cooling System:
19.8gal (US)
Engine Crankcase:
9.8gal (US)
Hydraulic Tank:
35.7gal (US)

Service Capacities - Not Refill

Fuel System:
128.4gal (US)
DEF Tank:
7.1gal (US)
Front Differential and Final Drive:
39gal (US)
Rear Differential and Final Drive:
37.2gal (US)
Transmission:
14.2gal (US)

Weights

Note:
*Calculated weights.

Standard Equipment

power train

  • Brakes, full hydraulic enclosed wet multiple-disc (SAFR)
  • Engine:
    –Cat C13 6 cylinder, diesel
    – Air-to-air aftercooler (ATAAC)
  • Filter, engine, remote mounted
  • Fuel priming aid
  • Pre-cleaner, engine air intake
  • Torque converter with automatic lock up clutch
  • Transmission:
    – Electronic Clutch Pressure Control (ECPC)
    – Automatic planetary power shift (4F/4R)
    –Transmission neutralizer
  • Traction control

electrical

  • Alarm, reversing
  • Alternator, 150 amp
  • Battery disconnect switch, ground level
  • Batteries, low maintenance
  • Diagnostic connector
  • Engine shutdown switch
  • Lighting LED
    –External, front, rear
    –Stop, dual
  • Receptacle group, auxiliary start
  • Starter, electric, 24-volt
  • Starting and charging system

operator environment

  • Automatic Brake Application (ABA)
  • Cab, ROPS and/or Falling Object Protective Structure (FOPS) certified
  • Color Multi Purpose Display (CMPD):
    –Front and rear brake gauges
    –Transmission pressure
    –System diagnostics
  • Control units, roof mounted (with service panel access)
  • Electrohydraulic implement controls (single joystick)
  • Horns, electric
  • Instrumentation/gauges:
    –Speedometer/tachometer
    –Fuel level
    –Hydraulic oil temperature
    –Engine coolant temperature
  • Light, warning, residual brake
  • Monitor, door latch
  • Mounts, radio and speaker (×2)
  • Operator Presence System
  • Seat:
    –Seat, suspension, air
    –Seat belt, retractable
  • Storage box, enclosed, 5 liter (3 gal)
  • Coat hook
  • Cup holder
  • Armrests and kneepads, independently adjustable

tires, rims, and wheels

  • Tires must be selected from the Mandatory Attachments section (choose between):
    –Tire, 26.5 × R25, VSMS2 Bridgestone
    –Tire, 26.5 × R25, VSDL Bridgestone
  • Rims:
    –Tubeless, set of 4

technology

  • Product Link™ Elite – machine health and information

other standard equipment

  • Brake axle cooling
  • Bucket dump (5.7 m3/7.5 yd3)
  • Bucket lip:
    –Modular weld on
  • Decals, International Picto Graphics
  • Fenders, front, rear
  • Firewall
  • Fuel tap, manual shutoff
  • Guards, engine and transmission
  • Handholds
  • Handrails, quick release
  • Lift arm positioner for return to dig
  • Lubrication System:
    –Semi central
  • Oil filter, transmission oil, long life
  • Operation and Maintenance Manual
  • Radiator grill, swing out
  • Wear bars:
    –Fuel tank
    –Hydraulic tank
  • Window:
    –Window, single pane

Optional Equipment

power train

  • Engine options:
    –Engine, Ventilation Reduction (VR)
    –Engine, Stage 3
    –Engine, Stage V
  • Park brake switch engagement – push to apply/pull to apply
  • Radiator, high efficiency
  • Reversible steering

electrical

  • Battery disconnect switch, in cab
  • Lighting LED:
    –Service bay
    –Truck loading
  • Switch isolation

operator environment

  • Operators station ROPS/FOPS enclosed
  • Camera, rear view
  • Seat:
    –Seat, suspension, TEE, air
    –Seat cover
  • Secondary Steering System

technology

  • Command for Underground* – machine pre-requisites
  • Autodig, underground
  • Cat Production Measurement (CPM) Payload Weighing System
  • Tire monitoring
  • *Please consult with your regional commercial or technology representative prior to upgrading your machine to Command for Underground.

tires, rims, and wheels

  • Rims:
    –Spare, tubeless
    –Rim identification numbering

other optional equipment

  • Brake Release Arrangements, includes Steering Release:
    –Recovery hook
    –Recovery bar
  • Bucket:
    –Various sizes, Dump (6.1 m3/8.0 yd3, 6.6 m3/8.6 yd3, 7.2 m3/9.4 yd3, 7.5 m3/9.8 yd3, 8.0 m3/10.5 yd3)
    –Bolt-together (6.8 m3/8.3 yd3, 7.5 m3/9.8 yd3)
    –Light material (8.6 m3/11.2 yd3)
    –Ejector (5.8 m3/7.6 yd3)
  • Bucket lip:
    –Bolt-on lip
    –Durilock™
    –Lip fully welded or tack welded
  • Cutting edge:
    –Modular weld on
    –Bolt-on half arrow
    –Durilock
  • Heel shrouds
  • Mechanically Attached Wear Plate System (MAWPS)
  • Wear bars, ejector and dump buckets
  • Wear liner
  • Fast Fill System:
    –Coolant
    –Engine oil
    –Fuel
    –Hydraulic oil
    –Transmission oil
  • Fire Suppression System – Ansul, wet
  • Fluids:
    –Arctic Fuel
    –Arctic Coolant
  • Guards, light and window
  • Handrails, additional
  • Lifting Group, Mine Transfer
  • Lubrication System:
    –Automatic
  • Reflective tape
  • Ride Control System
  • Service tools
  • Vandalism covers
  • Wear bars:
    –Cab
  • Window:
    –Window, dual pane