At a glance data:
Engine Model:
Cat C9.3B
Net Power - ISO 9249:
346hp
Net Power - ISO 9249 (DIN):
351hp (metric)
Engine Power - ISO 14396:2002:
347hp
Overview
The Cat® MH3050 offers superior performance within its size class. A wide undercarriage and stabilizer footprint keep the machine sturdily in place, while the boom and stick options combine to provide up to 18 m (59’1”) reach. The MH3050 combines components from next generation Cat excavators with the material handler cab to bring you maximized productivity, enhanced comfort, and the reliability you expect from your machine.
Category:
Wheel Material Handlers
Category:
Wheel Material Handlers
Brand:
Cat
Brand:
Cat
Engine
Engine Model:
Cat C9.3B
Net Power - ISO 9249:
346hp
Net Power - ISO 9249 (DIN):
351hp (metric)
Engine Power - ISO 14396:2002:
347hp
Engine Power - ISO 14396 (DIN):
352hp (metric)
Bore:
4.5in
Stroke:
5.9in
Displacement:
568in³
Biodiesel Capability:
Up to B20¹
Emissions:
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (1):
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,900 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2):
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Transmission
Drawbar Pull:
40915lb/ft
Maximum Travel Speed:
11.2mile/h
Hydraulic System
Maximum Pressure - Implements:
4496psi
Maximum Pressure - Travel:
5076psi
Maximum Pressure - Swing:
4264psi
Machine Weights
Maximum Operating Weight:
110250lb
Minimum Operating Weight:
105800lb
Service Refill Capacities
Fuel Tank Capacity:
158.5gal (US)
Cooling System:
10.6gal (US)
Engine Oil:
8.5gal (US)
Final Drive - Each:
1.2gal (US)
Hydraulic System - Including Tank:
111.7gal (US)
Hydraulic Tank:
49.1gal (US)
Diesel Exhaust Fluid Tank:
21.1gal (US)
Rear Axle - Housing (Differential):
10.6gal (US)
Front Steering Axle - Differential:
10.6gal (US)
Powershift Transmission:
0.8gal (US)
Swing Mechanism
Swing Speed:
7r/min
Maximum Swing Torque:
105820ft·lbf
Dimensions
Boom:
MH 10.95 m (35'11")
Stick:
Industrial 8.3m (27'3")
Shipping Height (with OPG, without stick):
12.2ft
Shipping Length:
48.7ft
Machine Length:
22.5ft
Tail Swing Radius:
11.6ft
Counterweight Clearance:
5.3ft
Cab Height- Lowered:
12ft
Cab Height-Lowered with OPG:
12.2ft
Cab Height-Raised:
18.4ft
Cab Height-Raised with OPG:
20.7ft
Wheel Base:
11.2ft
Shipping Width:
11.4ft
Ground Clearance:
0.9ft
Undercarriage Length:
22.2ft
Upper Frame Width (including handrails):
10.2ft
Working Ranges
Maximum Reach:
59.3ft
Boom:
MH Boom 10.95 m (35'11")
Stick:
Industrial 8.3m (27'3")
Maximum Height:
62.4ft
Minimum Dump Height:
17.5ft
Maximum Reach at Ground Line:
59.3ft
Maximum Depth:
18.9ft
Boom Pin Height:
44.2ft
Air Conditioning System
Note (1):
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.25 kg (2.76 lb) of refrigerant which has a CO2 equivalent of 1.787 metric tonnes (1.970 tons).
Standard Equipment
note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
boom and stick
- 10.95 m (35'11") Straight Material Handling boom
- 8.3 m (27'3") Industrial stick
cab
- Advanced sound suppressed TOPS certified cab with rubber mounts
- Heated and cooled premium seat with air suspension with headrest
- High-resolution 254 mm (10") LCD touchscreen monitor
cat technology
- VisionLink®
- Cat Payload
- Remote Flash
- Remote Troubleshoot
electrical
- LED lights on boom, stick and cab
- LED lights on chassis and counterweight
- Programmable time-delay LED working lights
- Maintenance free batteries
- Centralized electrical disconnect switch
engine
- Automatic engine speed control
- Three selectable modes: Power, Smart, Eco
- Remote disable
- 52°C (125°F) high-ambient cooling capacity
- Cold starting capability for -32°C (-25°F)
- Double element air filter with integrated precleaner
- Electric fuel priming pump
- Two-stage fuel filtration system with water separator and indicator
- Secure start with Personal Identification Number (PIN) code
- On-demand hydraulic cooling fan with auto-reverse function
hydraulics
- SmartBoom™
- Boom and stick lowering control check valves
- Boom and stick regeneration circuits
- Electronic main control valve
- Automatic hydraulic oil warm up
- High performance hydraulic return filter
- 2-Slider joysticks
- Medium pressure (grapple rotate) and cab riser valve
- Capability of installing additional generator pump and circuit
- Fine swing capability
- Joystick steering
- Automatic swing parking brake
- Adjustable hydraulic aggressiveness
- Pattern changer
safety and security
- 2D E-fence with Cab Avoidance
- Caterpillar One Key Security System
- Travel alarm
- Signal/warning horn
- Lockable external tool/storage box
- Neutral lever (lock out) for all controls
- Ground-level accessible secondary engine shutoff switch in cab
- Bluetooth® receiver
- Anti-skid plate and countersunk bolts on service platform
service and maintenance
- Sampling ports for Scheduled Oil Sampling (S·O·S℠)
- QuickEvac™ maintenance ready
- Grouped location for engine oil and fuel filters
- Automatic lubrication system for implement and swing system
undercarriage and structures
- All wheel drive
- Automatic brake/axle lock
- Creeper speed
- Electronic swing and travel lock
- Heavy-duty axles, advanced disc brake system and travel motor, adjustable braking force
- Oscillating front axle, lockable, with remote greasing point
- Access steps and one tool box at the undercarriage
- Two speed hydrostatic transmission
- Counterweight 9000 kg (19850 lb)
Optional Equipment
note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
cab
- Operator Protective Guards (OPG)
electrical
- Generator, 25 kW with wiring to stick nose
engine
- Cooling door with integrated fine mesh screen
hydraulics
- Cat BIO HYDO™ Advanced biodegradable hydraulic oil
safety and security
- Rear and right-side-view cameras
- 360° visibility
- Rotating beacon on cab
undercarriage and structures
- Tires, 12.00-24, dual, solid rubber
- Tires, 14.00-24, dual, solid rubber
- Access steps rear at the undercarriage
Similar Products
MH3024 Wheel Material Handler
Engine Model:
Cat C9.3B
Net Power - ISO 9249:
346hp
Net Power - ISO 9249 (DIN):
351hp (metric)
Engine Power - ISO 14396:2002:
347hp
MH3026 Wheel Material Handler
Engine Model:
Cat C9.3B
Net Power - ISO 9249:
346hp
Net Power - ISO 9249 (DIN):
351hp (metric)
Engine Power - ISO 14396:2002:
347hp
MH3050 Wheel Material Handler
Engine Model:
Cat C9.3B
Net Power - ISO 9249:
346hp
Net Power - ISO 9249 (DIN):
351hp (metric)
Engine Power - ISO 14396:2002:
347hp